The manufacturing process of deep hole drilling is widely used in the processing of injection molds. This method requires a spec…… MORE
In fact, the common processing of the power supply plastic shell mainly includes a female mold composed of a female mold combine…… MORE
In the process of injection molding, due to the uneven cooling and shrinkage of plastic in the mold cavity and the unreasonable …… MORE
1. Good product structure (1) product design should try to avoid unnecessary side concave and the use of mold core pulling mecha…… MORE
Plastic shell, as the name suggests, is a shell product made of plastic materials. Such products generally need injection moldin…… MORE
Injection molding production is the last step of molding injection molded parts. Before injection molding processing and product…… MORE
At present, there are six trends of modified plastics for household appliances. It mainly includes: brighter appearance color \ …… MORE
療器材類/美容儀器殼8.jpg)
1、外觀和用料 外觀和用料是一個醫療器械外殼的基本上的特點，外觀直接決定了一個外殼能不能被客戶接受的首要標準，所以現階段的外觀也逐漸偏重多樣化發展趨勢，因而在我們的測試中也占有一定的比重。用料關鍵取決于醫療器械外殼廠家選用的材料，醫療器械外殼的邊緣是否經過打卷處理，材料的好壞也會影響到防電磁輻射性能。 ……
MORE
塑膠外殼注塑成型的解鎖模具很容易產生振動，對機器的壽命和穩定性影響很大。因此，在調整塑膠外殼解鎖模具的時候，請注意以下的事項：慢速開啟速度是模具的啟動速度，所以速度低于中速，一般使用慢速中壓。因?yàn)槟０逶阪i緊的過程中有一定的變形產生夾緊力，所以啟動壓力可以適當高一些，一般在50%左右。慢位看型號而定，一般在塑膠外殼的模具……
MORE
Lack of glue, also known as insufficient filling, is one of the common problems in the process of injection molding. The injecti…… MORE
In the process of injection molding, some carelessness will often cause defects in plastic products, which will affect the effic…… MORE
In fact, the common processing of the power supply plastic shell mainly includes the female mold with variable cavity composed o…… MORE
備/監控器3.jpg)
療器材類/假牙清潔器殼.jpg)
殼2.jpg)
類/掃地機殼2.jpg)
殼10.jpg)
